Equipment You’ll Need for Grease Trap Cleaning
Equipment You’ll Need for Grease Trap Cleaning

Table of Contents

Equipment You’ll Need for Grease Trap Cleaning

Grease traps are very important components of commercial kitchens. Restaurants and other food-serving establishments must install grease traps or grease interceptors in their commercial kitchens as required by law. To avoid clogging of grease interceptors and grease traps in Seattle, they must be cleaned regularly and kept below 25% fats, oils, greases, and settled solids.

It may seem unpleasant and messy to clean a grease trap, but it must be done regularly to ensure its effectiveness. Taking care of grease traps does not need to be complicated, but it needs to be handled by someone with the right license to dispose of FOGS and wastewater.

The following is a list of the gears used for grease trap cleaning in Olympia:

How often should a grease trap be cleaned out?


The frequency of cleaning a grease trap can depend on various factors, including the size of the grease trap, the amount of grease it accumulates, and the type of establishment using it. However, as a general guideline, it is recommended that grease traps be cleaned out at least once every three months.


For larger grease traps, or those in establishments with high volume usage, such as restaurants or food processing facilities, cleaning may be required more frequently. Cleaning the grease trap every month may be necessary to prevent it from overloading.


It’s essential to ensure that the grease trap is cleaned out regularly, as failure can result in clogs, backups, and foul odors. Regular maintenance can also help extend the life of the grease trap and prevent the need for costly repairs.


It’s always best to consult a professional grease trap cleaning service in Bellevue to determine the appropriate cleaning frequency for your specific needs. They can help you develop a maintenance plan tailored to your establishment’s usage and help ensure that your grease trap is kept in top working order.


Equipment Required for Grease Trap Cleaning. 

  • Liquid Core Sampler


 A liquid core sampler is the first tool that is needed to start the grease trap cleaning. Before starting the cleaning process, you should learn how to test the device’s contents with a liquid core sampler for fats, oils, grease, food solids, and water.

  • Vacuum Pump


A vacuum pump truck is essential for proper cleaning and servicing grease traps in Auburn. In grease traps, vacuum pumps discharge fats, oils, grease waste, food solids, and water. It is common for vacuum pump trucks to have large vacuum tanks and heavy-duty vacuum pumps that vary in size and construction. An extension of the truck’s hoses is attached to the grease trap or grease interceptor that needs to be serviced.

The location of grease traps and grease interceptors can sometimes make it difficult for a vacuum pump truck to reach them and remove grease trap waste directly. Cleaning the unit properly requires the use of a liquid waste vacuum pump. Multiple trips are required between the grease trap being serviced and the vacuum pump truck with the remote dolly pumper for grease trap cleaning in Tacoma.

  • Scraper


Grease trap cleaning technicians need a good scraper tool to properly clean grease traps or interceptors. As part of the service process, grease, and FOG are scraped off the unit’s walls using a scraper tool. Home improvement stores carry grease trap cleaning scrapers that can be used as ice scrapers and scapers for grease trap cleaning in Federal Way.

  • Water Hose


Following scraping and pumping out the FOG content from the walls and pipes of the unit, the experts coming to clean the grease trap can wash the walls and pipes. For the unit to be properly cleaned, the grease that builds up on the walls must be hosed down or washed down with water. You will also need plumbing pliers, pry bars, and a battery-operated screwdriver to clean the trap and interceptor.

  • A Gas Mask 

Filtering FOG from wastewater and storing it in a sludge tank is the function of grease traps. Without proper grease trap cleaning in Auburn, food waste remains in the trap and rots over time. A grease trap usually emits a bad odor, so you should wear a gas mask or a nose plug whenever you’re around one.

Hire a Professional for Grease Trap Cleaning


If you want to clean your grease trap in Bellevue, hiring a professional cleaning company like West Coast Grease Traps is important. We have all the necessary equipment to make the process easier and more efficient. Our team of experts is equipped with pumping trucks, hoses, scrapers, and other necessary tools to thoroughly clean and grease trap repair in Bellevue.


With years of experience in grease trap cleaning, our team has the expertise to handle the job safely and effectively. We take pride in providing top-notch service and customer satisfaction. Our team will ensure that your grease trap is cleaned and functioning properly, which can prevent costly repairs and environmental hazards.


Hiring West Coast Grease Traps means you can sit back and relax, knowing that your grease trap is in good hands. We offer flexible scheduling, competitive pricing, and a commitment to excellence. So, call us today if you want a hassle-free and reliable grease trap cleaning service.

Recent Post

    Contact Us