Hydro Jetting: How Often Do You Need it?
Hydro Jetting: How Often Do You Need it

Table of Contents

Hydro Jetting: How Often Do You Need it?

The presence of clogs or slow drains in sewers is a common concern among homeowners. Over time the buildup of grease, debris, and other minerals can cause damage to your pipeline, thus resulting in clogs and costly repairs. Toilets and drains can also become clogged with other materials. In the same way that your pipe can become clogged multiple ways, there are countless methods to resolve it.

Hydro jetting, on the other hand, is more effective than all of these solutions combined. A high-pressure water stream is used for flushing out sludge and grease from drainage pipes. An expert will conduct a video inspection first to determine the exact cause of the problem and where the pipes are damaged. Let’s read about the what, why, and how of hydro jetting in Olympia

What is Hydro Jetting?

The process of hydro jetting involves using high-pressure water pressure drawn through a jet nozzle to remove coating materials, accumulated contamination, dirt buildup on surfaces, and blockages in pipes using high-velocity water pressure applied through a jet nozzle.

Hydro jet systems typically consist of the following components:

  • A pressure pump.
  • The right nozzle type.
  • Waste handling equipment.
  • An enclosure to protect the work area.
  • Other accessories.

Depending on what needs to be accomplished, hydro-jetting systems can operate at pressures as low as 4,000 pounds per square inch (psi) or as high as 60,000 psi (414 MPa).

What benefits of Hydro Jetting?


  • Non-Invasive

It is common for professionals to dig a trench to reach your sewer lines when you have an issue with them. You may have to invest time and money in this process, and you may create a mess in the process. However, you can access clogged pipelines using hydro jetting in Auburn via a non-invasive procedure without digging up your garden. Pipes can be easily accessed through the cleanout.

  • Environmentally Friendly

It uses a lot of water, but hydro jetting doesn’t harm the environment as much as other processes. This technique is environmentally friendly because it uses only pressurized water. Despite its chemical-free nature, hydro jetting can be used even by people who live near lakes and rivers.

Hydro jetting might seem like an environmental waste because of the amount of water used. This isn’t true. Chemical procedures used in other techniques are much less eco-friendly than this non-invasive method.

  • Long-lasting and cost-effective

Liquid drain cleaners are commonly used by homeowners whenever their pipes become clogged. Sadly, this only works temporarily. Even after using a cleaning product, your plumbing system will still become clogged, requiring you to buy another one.

The upfront cost of hydro jetting is generally higher than other cleaning procedures. The good news is that it doesn’t just clear out some parts of your plumbing system but the entire system. The chances of an immediate re-clog are unlikely, so you won’t have to call in the experts soon.

Additionally,  Hydro Jetting in Bellevue offers long-lasting results. Water passing through your pipes under high pressure makes it difficult for grime and debris to accumulate. Thus, your plumbing system will function more efficiently for longer since you will have to clean your pipes less often.


How Does Hydro Jetting Work?


The method and equipment you need for Hydro Jetting in Tacoma differ depending on whether your clog is in your kitchen or your main sewer line. Kitchen or main sewer line clogs are treated with special nozzles and various pressures, depending on the type of clog and the pipe size.


An interchangeable nozzle system is attached to a long hose with a motor and a large water tank. A high-pressure water system flushes high-pressure water through your pipes, consuming and breaking down buildup and blockages.


Using the motor, we send the pressurized water through the nozzle after lowering the hose into the drain opening. Water flows forwards and backward through the nozzles, pushing through clogs and simultaneously cleaning the walls of the pipes and drains.


How often do you need Hydro Jetting?


Hydro Jetting in Seattle is recommended every 18-22 months as a preventive maintenance measure. A high-pressure water stream can remove stubborn debris, pipe scale, and tree roots from your plumbing system.


Act fast if you notice the following signs:


When you notice problems with your sewer or drain lines, you should consider pipe jetting sooner rather than later. Here are some common warning signs:

  • Your pipes are emitting bad odors into your home
  • Backups, clogs, and slow drains regularly
  • You have a wet spot in your yard

Video inspections are also common with sewer jetting, allowing the source of any suspected issues to be identified. In cases where thorough cleaning is likely to resolve the problem, hydro jetting may be recommended.



Don’t hesitate to contact West Coast Grease Traps if you think Hydro Jetting in Federal Way would benefit your business. Our drain and sewer line clearing methods can be customized according to your pipes’ size and needs.

Get in touch with us today about our hydro jetting services.

Recent Post

    Contact Us