Regularly cleaning the drain pipes and grease trap keeps your kitchen hygienic and free of unwanted FOG. The sewage system will also be blockage-free and last for a long time. A grease trap is converter equipment that separates fats, oils, and grease (FOG) from your kitchen waste to allow water to flow freely down the drain.
There are two methods for grease trap cleaning in Tacoma – traditional and hydro jetting. In this blog, we’ll look at the differences in both cleaning methods and identify the right choice for your needs.
Tools and Equipment Used for Hydro Jetting and Traditional Drain Cleaning
Grease traps and drain pipes can be cleaned using traditional tools or hydro jetting equipment. Hydro jetting in Bellevue undoubtedly is more effective, versatile, safe, and cost-effective. Using high-pressure water to clean drains is also eco-friendly, as no harmful chemicals are used. Before we discuss the tools, let’s explain hydro jetting in simple terms. Hydro jetting is a pressure-based method in which high-pressure water is streamed into the grease trap or drain to remove clogs and blockage.
Different service providers use different types of hydro jets. The equipment can have a psi of 3000 to 8000 to effectively clean a grease trap in Bellevue. Residential kitchens need hydro jets with smaller psi (around 3000-4000), while commercial kitchens need heavy-duty cleaning with higher psi.
No other cleaning agent or appliance is needed when hydro jetting in Auburn. However, for traditional cleaning, you need either of the following tools:
- Plungers
Plungers are best for clogs close to the fixture but can damage the seals when used frequently. You should use your strength to pump the plunger.
- Chemicals
Chemicals can be harmful and cause allergic reactions in humans and damage the drain system. Yet, they provide quick results.
- Mechanical Snakes
Mechanical snakes are powerful and suitable for large drains with more clogs. However, they run on electric power and can get stuck in larger debris.
- Augers
Augers are similar to mechanical snakes but are more effective and don’t get stuck. That said, they can damage the pipes and should be operated only by professionals.
Process and Techniques Involved in Hydro Jetting and Traditional Drain Cleaning
Traditional cleaning of a grease trap in Auburn involves using one or more of the above-mentioned tools. It is time-consuming and effort-intensive. The result may not always be 100%, as these techniques are designed to clear clogs but not to clean the drain.
Hydro jetting in Olympia is the process of blasting high-pressure water into the drain using special equipment. The pressure can be adjusted to remove clogs and clean the walls of the drain until the pipes are fully clear.
Safety and Environmental Impacts of Hydro Jetting and Traditional Drain Cleaning
Traditional drain cleaning chemicals are toxic for humans, animals, and the environment. The chemicals can endanger lives if used regularly and damage the nearby water bodies. Allergic reactions are a common side effect of traditional chemical cleaning methods. They also weaken the seals and drain pipes over time.
Hydro jetting in Tacoma is safe and eco-friendly. Only water is used for cleaning the drain pipes. Moreover, hydro jetting relies on high pressure rather than excess water, requiring less water than traditional cleaning. People living in coastal regions find hydro jetting a safer cleaning method.
Cost Comparison of Hydro Jetting and Traditional Drain Cleaning Methods
Since cleaning the grease trap in Seattle is mandatory, you have to choose a method that fits your budget. At a single glance, hydro jetting is expensive and costs more than traditional drain cleaning methods. However, a deeper analysis proves otherwise.
For example, hydro jetting in Federal Way takes only a fraction of the total time required for traditional cleaning. If the company charges an hourly rate, you’ll pay more for traditional drain cleaning due to the excess time spent on it.
Furthermore, hydro jetting doesn’t damage the grease trap or drain pipes. This increases the longevity of the drain pipes, thus saving money in the long run. Practically speaking, hydro jetting in Seattle is a cost-effective method with greater ROI.
Conclusion
Traditional drain cleaning methods are reactive, while hydro jetting is a proactive process for grease trap cleaning in Federal Way. It is a popular preventive maintenance method that cleans and keeps the drains free of clogs, dirt, blockages, etc. Hiring professional service providers who use advanced equipment like hydro jets will be beneficial in several ways. The technicians provide routine maintenance and also detect early signs of damage during the inspection and do the needful.
Reach out to a reputed and reliable locally-owned business to provide the necessary hydro jetting services for affordable prices. Call us today to schedule an appointment.